View source for Display device not supported

== Problem ==
When the app starts recording the following error message is displayed:

<blockquote>
The specified device interface or feature level is not supported on this system.

If your device supports multiple display processors, run the application on the integrated GPU instead of on the discrete GPU.
</blockquote>

This issue occurs because the app does not support being run against the discrete GPU on a Microsoft Hybrid system.

== Resolution ==
To work around this issue, run the application on the integrated GPU instead of on the discrete GPU on a Microsoft Hybrid system, as described below.

'''Note:''' Before configuring the display, make sure you have installed latest display drivers on your device.

=== NVIDIA ===
To select Integrated GPU for Screenbits:
#Right click on desktop and select '''NVIDIA Control Panel'''.
#Select '''Manage 3D Settings''' from the task list on the left side of the panel.
#Under the ''Program Settings'' tab, click '''Add''' to open the ''Add'' dialog.
#Select '''Screenbits.App''' in the list, then click '''Add Selected Program''' to select the app and close the dialog.
#Select '''Integrated graphics''' from the ''Preferred graphics processor'' selector.
#Click '''Apply''' to apply the changes.

<!--
[[File:Nvidia-manage-3d-settings.png|frame|left|Figure 1: Manage 3D Settings - NVIDIA Control Panel]]
<br clear=all>
-->

=== AMD ===
To select Integrated GPU for Screenbits:
#Right click on desktop and select '''Catalyst Control Center'''.
#Click '''Power''' to open the ''Power'' page.
#Click '''Switchable Graphics''' to open the ''Switchable Graphics'' page.
#Under the ''Recent Applications'' list, click ''Not Assigned'' button in front of ''Screenbits'', then select '''Power Saving'''.
#Click '''Apply''' to apply the changes.